Cautions :

(1) Storage Conditions

The LEDs should be kept at 30

or less and 60% RH or less and should be used within a

year and should be soldered within 168 hours (7days) after opening the package.

(2) Heat Generation

The thermal design of the end product is very important. It is necessary to avoid intense heat

generation and operate within the maximum ratings given in this specification.

The operating current should be decided after considering the ambient maximum temperature

of LEDs.

(3) Cleaning

Isopropyl alcohol is recommended to be used as a solvent for cleaning the LEDs.

Before cleaning, a pre-test should be done to confirm whether any damage to the LEDs

will occur.

BVZ-925GN4

Bright View Electronics