E5GN

9

Specifications

Ratings

Power supply voltage

No D in model number: 100 to 240 VAC, 50/60 Hz

D in model number: 24 VAC, 50/60 Hz; 24 VDC

Operating voltage range

85% to 110% of rated supply voltage

Power

consump-

tion

E5GN

Screw terminal

block

100 to 240 VAC: 5.5 VA (max.)

24 VAC/VDC: 3 VA/2 W (max.)

E5GN-

@-C

Screwless clamp

terminal block

100 to 240 VAC: 5.5 VA (max.)

24 VAC/VDC: 3 VA/2 W (max.)

Sensor input

Models with temperature inputs

Thermocouple: K, J, T, E, L, U, N, R, S, B, W, or PL II

Platinum resistance thermometer: Pt100 or JPt100

Infrared temperature sensor: 10 to 70

°C, 60 to 120°C, 115 to 165°C, or 140 to 260°C

Voltage input: 0 to 50 mV

Models with analog inputs

Current input: 4 to 20 mA or 0 to 20 mA

Voltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 V

Input impedance

Current input: 150

Ω max., Voltage input: 1 MΩ min. (Use a 1:1 connection when connecting the ES2-HB.)

Control method

ON/OFF control or 2-PID control (with auto-tuning)

Control

outputs

Relay output

SPST-NO, 250 VAC, 2 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5 V,

10 mA

Voltage output

(for driving SSR)

Output voltage: 12 VDC

±15% (PNP), max. load current: 21 mA, with short-circuit protection circuit

Current output

4 to 20 mA DC/0 to 20 mA DC, load: 500

Ω max., resolution: approx. 10,000

Auxiliary

outputs

Number of outputs 1 or 2 max. (Depends on the model.)

Output

specifications

Relay output: SPST-NO, 250 VAC, 2 A (resistive load), electrical life: 100,000 operations, minimum

applicable load: 5 V, 10 mA

Event

inputs

Number of inputs

2

External contact

input

specifications

Contact input: ON: 1 k

Ω max., OFF: 100 kΩ min.

Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.

Current flow: Approx. 7 mA per contact

Setting method

Digital setting using front panel keys

Indication method

11-segment digital display and individual indicators (7-segment display also possible)

Character height: PV: 7.5 mm, SV: 3.6 mm

Multi SP

Up to four set points (SP0 to SP3) can be saved and selected using event inputs, key operations, or serial

communications.

Bank switching

Not supported

Other functions

Manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout

detection, 40% AT, 100% AT, MV limiter, input digital filter, self-tuning, temperature input shift, run/stop,

protection functions, control output ON/OFF counter, extraction of square root, MV change rate limit, logic

operations, PV/SV status display, simple program, automatic cooling coefficient adjustment

Ambient operating temperature

−10 to 55°C (with no condensation or icing), for 3-year warranty: −10 to 50°C

Ambient operating humidity

25% to 85%

Storage temperature

−25 to 65°C (with no condensation or icing)