SPV1020 datasheet(5/19 Pages) STMICROELECTRONICS

5 / 19 page

SPV1020

Pin connection

Doc ID 17588 Rev 3

5/19

Table 2.

Pin description

Name

Type

Description

PowerSSO-36

VIN

Supply

DC input power supply unit.

7,8,17,18,19,20,29,30

VOUT

Supply

Booster output voltage

12,13,24,25

PGND

Ground

Power ground

1SGND

Ground

Signal ground reference. The exposed pad is connected to

PGND.

22,23,26,27,15,14,11,1

LX1…4

Booster inductor connection.

9,16,21,28

CB1…4

I/O

External bootstrap capacitors must be connected between

these pins and LXi

VREG

I/O

Power supply for internal low voltage circuitry; an external

capacitor must be connected to this pin referenced to

SGND

VIN_SNS

Sense pin of input voltage. To be biased with a resistor

divider between VIN and SGND

3VOUT_SNS

Sense pin of output voltage. To be biased with a resistor

divider between VOUT and SGND

XCS

Activates the SPI

VIN_SNS_M

Dedicated ground for VIN_SNS

PZ_OUT

I/O

Compensates the output voltage feedback loop. A series

resistor and capacitor are connected between PZ_OUT and

SGND.

SPI_DATA_OUT

Data OUT for SPI interface

SPI_CLK

Clock for SPI interface.

SPI_DATA_IN

Data IN for SPI interface.

4OSC_IN

Pin for adjusting the switching frequency; to set the default

value of 100 kHz, connect OSC_IN to VREG. Otherwise

connect OSC_IN through a resistor to SGND.

SPV1020 Datenblatt(PDF) 5 Page - STMicroelectronics

SPV1020 Datenblatt(HTML) 5 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Datenblatt Download

Link URL