LTC1992 datasheet(18/24 Pages) LINER

Teilenummer	LTC1992

Bauteilbeschribung	18-Bit, 1.6Msps, Pseudo-Differential Unipolar SAR

PDF	24 Pages

Scroll/Zoom	100%

Hersteller	LINER [Linear Technology]

Direct Link	http://www.linear.com

Logo

18 / 24 page

LTC2369-18

236918fa

BOARD LAYOUT

To obtain the best performance from the LTC2369-18

a printed circuit board is recommended. Layout for the

printed circuit board (PCB) should ensure the digital and

analog signal lines are separated as much as possible. In

particular, care should be taken not to run any digital clocks

or signals alongside analog signals or underneath the ADC.

Recommended Layout

The following is an example of a recommended PCB layout.

A single solid ground plane is used. Bypass capacitors to

the supplies are placed as close as possible to the supply

pins. Low impedance common returns for these bypass

capacitors are essential to the low noise operation of the

ADC. The analog input traces are screened by ground.

For more details and information refer to DC1813A, the

evaluation kit for the LTC2369-18.

Partial Top Silkscreen

LTC1992 Datenblatt(PDF) 18 Page - Linear Technology