H7GP

3

■ Characteristics

Insulation resistance

100 M

Ω min. (at 500 VDC)

Dielectric strength

2,000 VAC, 50/60 Hz for 1 min between current-carrying terminal and exposed non-current-carrying metal parts

(AC model)

1,000 VAC, 50/60 Hz for 1 min between current-carrying terminal and exposed non-current-carrying metal parts

(DC model)

2,000 VAC, 50/60 Hz for 1 min between power terminals and control input terminals (AC model)

Impulse withstand voltage 3 kV (between power terminals) (1 kV for 12-to-24-VDC models)

4.5 kV (between current-carrying terminal and exposed non-current-carrying metal parts) (1.5 kV for 12-to-24-VDC

models)

Noise immunity

±1.5 kV (between AC power terminals), ±480 V (between DC power terminals),

±480 V (between input terminals);

square-wave noise by noise simulator (pulse width: 100 ns/1

µs, 1-ns rise)

Static immunity

Display:

Malfunction:8 kV

Destruction:15 kV

DIP switch: Malfunction:4 kV

Destruction:8 kV

Vibration resistance

Destruction: 10 to 55 Hz with 0.75-mm single amplitude, 2 hours each in three directions

Malfunction: 10 to 55 Hz with 0.5-mm single amplitude, 10 minutes each in three directions

Shock resistance

Ambient temperature

Operating: –10

°C to 55°C (with no icing)

Storage:

–25

°C to 65°C (with no icing)

Ambient humidity

Operating: 35% to 85%

EMC

(EMI)

EN61326

Emission Enclosure:

EN55011 Group 1 class A

Emission AC Mains:

EN55011 Group 1 class A

(EMS)

EN61326

Immunity ESD:

EN61000-4-2: 4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Immunity RF-interference:

EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1 GHz) (level 3);

10 V/m (Pulse-modulated, 900 MHz

±5 MHz) (level 3)

Immunity Conducted Disturbance: EN61000-4-6: 10 V (0.15 to 80 MHz) (according to EN61000-6-2)

Immunity Burst:

EN61000-4-4: 2 kV power-line (level 3);

2 kV I/O signal-line (level 4)

Immunity Surge:

EN61000-4-5: 1 kV line to lines (power and output lines) (level 2);

2 kV line to ground (power and output lines) (level 3)

Immunity Voltage Dip/Interruption: EN61000-4-11: 0.5 cycle, 100% (rated voltage)

Approved standards

UL508, CSA22.2 No.14, conforms to EN61010-1, VDE0106/P100

Case color

Rear section: Gray smoke; Front section: 5Y7/1 (light gray) or N1.5 (black)

Weight

Approx. 75 g