CXD3003 datasheet(40/137 Pages) SONY

Teilenummer	CXD3003

Bauteilbeschribung	CD Digital Signal Processor with Built-in Digital Servo and DAC

PDF	137 Pages

Scroll/Zoom	100%

Hersteller	SONY [Sony Corporation]

Direct Link	http://www.sony.co.jp

Logo

40 / 137 page

– 40 –

CXD3003R

Command bit

Processing

SCOR SEL = 0

SCOR SEL = 1

FSW signal is output.

GRSCOR (protected SCOR) is output.

Command bit

Processing

SCSY = 0

SCSY = 1

No processing.

GRSCOR (protected SCOR) synchronization is applied again.

∗ Used when outputting GRSCOR from the FSW pin.

∗ Used to resynchronize GRSCOR.

the rising edge signal of this command bit is used internally. Therefore, when resynchronizing GRSCOR, first

return the setting to 0 and then set to 1.

GRSCOR achieves the crystal accuracy by removing the jitter components included in the SCOR signal. This

signal is synchronized with PCMDATA.

The resynchronization conditions are when GTOP = high or when the SCSY pin = high.

(Same as when SCSY = 1 is sent by the $8X command.)

Command

Data 5

MODE

specification

ERC4

SCOR

SEL

SCSY

Command bit

Processing

ERC4 = 0

ERC4 = 1

C2 error double correction is performed when DSPB = 1.

C2 error quadruple correction is performed when DSPB = 1.

CXD3003 Datenblatt(PDF) 40 Page - Sony Corporation