TDA7498 datasheet(21/28 Pages) STMICROELECTRONICS

Teilenummer	TDA7498

Bauteilbeschribung	100-watt 100-watt dual BTL class-D audio amplifier

PDF	28 Pages

Scroll/Zoom	100%

Hersteller	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

21 / 28 page

TDA7498

Applications information

Doc ID 16107 Rev 8

21/28

4.3

Gain setting

The gain of the TDA7498 is set by the two inputs, GAIN0 (pin 30) and GAIN1 (pin31).

Internally, the gain is set by changing the feedback resistors of the amplifier.

4.4

Input resistance and capacitance

The input impedance is set by an internal resistor Ri = 60 k

Ω (typical). An input capacitor

(Ci) is required to couple the AC input signal.

The equivalent circuit and frequency response of the input components are shown in

Figure 22. For Ci = 470 nF the high-pass filter cutoff frequency is below 20 Hz:

fC = 1 / (2 * π * Ri * Ci)

Figure 22.

Input circuit and frequency response

Table 8.

Gain settings

GAIN0

GAIN1

Nominal gain, Gv (dB)

25.6

31.6

35.6

37.6

Input

signal

TDA7498 Datenblatt(PDF) 21 Page - STMicroelectronics