KTPF0100UG datasheet(48/74 Pages) FREESCALE

48 / 74 page

KTPF0100UG, Rev. 2.0

Freescale Semiconductor

Graphical User Interface Description

VREFDDR:OFF

Disables the VREFDDR supply.

VSNVS:ON

Enables the VSNVS supply

VSNVS:OFF

Disables the VSNVS supply.

PWRON:Float

Releases the PWRON signal to a high-impedance state, allowing the

PF0100 to start up. (Legacy for Revision A scripts)

LOG Commands

LOG:SWx:<log operator>

Shows the current value of the <log operator> for the SWx regulator.

Log operators:

• VOUT = Output voltage in normal operation.

• STBY = Output voltage in STANDBY mode.

• OFF = Output voltage in OFF mode.

• MODE = Current switching mode set.

• OTP_VOUT = Default power up voltage set through OTP.

• OTP_SEQUENCE = Default power up sequence of regulator.

LOG:VGENx:<log operator>

Shows the current value of the <log operator> for the VGENx regulator.

Log operators:

• VOUT = Output voltage.

• ENABLE = supply is ENABLED/DISABLED.

• OTP_VOUT = Default power up voltage set through OTP.

• OTP_SEQUENCE = Default power up sequence of regulator.

LOG:VSWBST:<log operator>

Shows the current value of the <log operator> for the VSWBST regulator.

Log operators:

• VOUT = Output voltage.

• ENABLE = Supply is ENABLED/DISABLED.

• OTP_VOUT = Default power up voltage set through OTP.

• OTP_SEQUENCE = Default power up sequence of regulator.

LOG:VREFDDR:<log operator>

Shows the current value of the <log operator> for the VREFDDR

regulator.

Log operators:

• ENABLE = supply is ENABLED/DISABLED.

• OTP_SEQUENCE = Default power up sequence of regulator.

LOG:VSNVS:<log operator>

Shows the current value of the <log operator> for the VSNVS regulator.

Log operators:

• VOUT = Output voltage.

• OTP_VOUT = Default power up voltage set through OTP.

LOG:OTP_PU_CONFIG:<log operator> Shows the current value set as default by OTP.

• SEQ_CLK_SPEED = programmed power up sequencing speed.

• DVS_CLK_SPEED = programmed DVS speed.

• PWRON_MODE = programmed PWRON pin active level.

• PGOOD_ENABLE = Power good mode is on/off.

Table 8. Command List(2)

Command

Description

KTPF0100UG Datenblatt(PDF) 48 Page - Freescale Semiconductor, Inc

KTPF0100UG Datenblatt(HTML) 48 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74

Datenblatt Download

Link URL