 |
Datenblatt-Suchmaschine für elektronische Bauteile |
|
|
Datenblatt-Suchmaschine für elektronische Bauteile |
|
LTP5902-IPM Datenblatt(PDF) 19 Page - Linear Technology |
|
|
|||||||||||||||||||||||||||||
LTP5902-IPM Datenblatt(HTML) 19 Page - Linear Technology |
|
|
19 / 30 page  A d v a nce d I n fo rm a t i o n Eterna Datasheet Linear Technology / Dust Networks 19 8.4 Radio Transmitter Characteristics The following characteristics are measured with VSUPPLY = 3.6 V at 25 °C, unless otherwise specified. Table 8 Radio Transmitter Characteristics Parameter Conditions Min Typ Max Units Output power Calibrated settings Delivered to a 50 Ω load, over temperature and voltage ranges 0 +8 dBm dBm Spurious emissions 30 MHz to 1000 MHz 1 GHz to 12.75 GHz Upper Band Edge (Peak) Upper Band Edge (Average) Lower Band Edge Conducted measurement with a 50 Ω single-ended load, +8 dBm output power. All measurements made with Max Hold. RF implementation per Eterna reference design. RBW = 120 kHz, VBW = 100 Hz RBW = 1 MHz, VBW = 3 MHz RBW = 1 MHz, VBW = 3 MHz RBW = 1 MHz, VBW = 10 Hz RBW = 100 kHz, VBW = 100 kHz <–70 –45 -37 -49 -45 dBm dBm dBm dBm dBc Harmonic emissions 2 nd Harmonic 3 rd Harmonic Conducted measurement delivered to a 50 Ω load, Resolution Bandwidth = 1 MHz, Video Bandwidth = 1 MHz, RF implementation per Eterna reference design –50 –45 dBm 8.5 Digital I/O Characteristics The following characteristics are measured with VSUPPLY = 3.6 V at 25 °C, unless otherwise specified. Table 9 Digital I/O Type 1 Parameter Conditions Min Typ Max Units VIL (low-level input voltage) –0.3 0.6 V VIH (high-level input voltage) VSUPPLY - 0.3 † VSUPPLY + 0.3 † V VOL (low-level output voltage) IOL(max) = 1.2 mA 0.4 V VOH (high-level output voltage) IOH(max) = −1.8 mA VSUPPLY - 0.3 † VSUPPLY + 0.3 † V Input leakage current pull-up / pull-down pins disabled. 50 nA † Min and Min and Max IO input levels must respect the Minimum and Maximum voltages for VSUPPLY. Table 10 Digital I/O Type 2 Parameter Conditions Min Typ Max Units VIL (low-level input voltage) –0.3 0.6 V VIH (high-level input voltage) VSUPPLY - 0.3 † VSUPPLY + 0.3 † V VOL (low-level output voltage) Low Drive IOL(max) = 2.2 mA 0.4 V VOH (high-level output voltage) Low Drive IOH(max) = −3.2 mA VSUPPLY - 0.3 † VSUPPLY + 0.3 † V VOL (low-level output voltage) High Drive IO(max) = 4.5 mA 0.4 V VOH (high-level output voltage) IOH(max) = −6.3 mA VSUPPLY VSUPPLY V |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
German ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
