52

Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc.

2311 Statham Parkway, Oxnard, CA 93033 • 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com/

SPECIFICATIONS:

AC Input

90-132 and 180-264Vac, 50/60Hz single phase.

Input Current

9/4.5A.

Hold-Up Time

20mSec minimum from loss of AC input at full load, nominal line (115Vac).

Output Power

350W with cover fan option (390W peak).

Overload Protection

Standard on all outputs; revovery automatic.

Overvoltage Protection

Standard on all outputs within ranges below:

OUTPUT

OVP SETTING

V ADJ. RANGE

5V

5.6-6.8V

4.6-5.5V

12V & 15V

18-22V

11.5-15.3V

24V & 28V

29-35V

22.0-30.0V

Efficiency

74% minimum at full load; nominal input voltage.

Turn-on Time

Less than 1 second.

Input Protection

Internal AC fuse provided. Designed to blow only if a catastrophic failure

occurs in the unit—fuse does not blow on overload or short circuit.

Inrush Current

60A maximum.

Temperature Coefficient

0.03%/ºC typical on all units.

Environmental

Designed for 0 to 50

°C operation at full rated output power; derate

output current and total output power by 2.5% per

°C above 50°C. See

Environmental and Packaging Specifications (p. 11) for additional

information.

Power Fail

A TTL signal goes low upon failure, 6mS min. before output drops 5%.

Output Noise

0.5% RMS, 1% Pk-Pk, measured directly across output terminals.

Transient Response

Main output—500

µSec typical response time for return to within 0.5% of

final value for a 50% load step change.

∆i/∆t<0.2A/µSec. Maximum

voltage deviation is 3.5%.

Remote Sense

Standard on main output; will compensate for 0.5V of cabling losses.

Voltage Adjustment

Built-in potentiometers adjust outputs minimum of

±5%.

Reverse Voltage Protection

All outputs protected against inadvertent application of reverse voltage up

to 1 times rated current of the reversed output.

Leakage Current

100

µA.

EMI/EMC Compliance

All models include built-in EMI filtering to meet the following emissions

requirements:

EMI SPECIFICATIONS

COMPLIANCE LEVEL

Conducted Emissions

EN55022 Class B; FCC Class B

Static Discharge

EN61000-4-2, 6 kV contact, 3 kV air

RF Field Susceptibility

EN61000-4-3, 3 V/meter

Fast Transients/Bursts

EN61000-4-4, 2 kV, 5 kHz

Surge Susceptibility

EN61000-4-5, 1 kV diff., 2 kV com.

Safety

Approved to UL1950 (no D3 deviations), CSA22.2 No. 234L6, IEC950

and EN60950.

Vibration

Designed to meet requirements of MIL-STD 810E, Method 514.4

Category 1. This test consists of random vibration at 0.015g/Hz from 5 to

50Hz declining linearly to 0.15g2/Hz in each axis for one hour.

Shock

Designed to meet MIL-STD 810E, Method 516.4. Unpackaged units shall

meet the bench handling requirements of Procedure VI for four drops per

face.

FEATURES:

• Automatic line range selection

• Fully regulated and floating outputs

• Modular output configurations

• FCC, CISPR22 Class B

• "Smart Load" feature eliminates minimum load

requirements

• For medical version, see p. 116

• 2-year warranty

•

RSC350 RAINBOW SERIES SWITCHERS

marked to LVD