Long life, Downsized, 125℃

Please refer to "Product code guide (radial lead type)"

Sleeve (PET : Brown)

L'

15min.

4min.

Vent

◆DIMENSIONS [mm]

◆PART NUMBERING SYSTEM

φD

φd

F

φD'

L'

12.5

  14.5  16   18

0.6  0.8   0.8

0.8

5.0

7.5

7.5

7.5

φD+0.5max.

L+1.5max.

Gas escape end seal

Terminal Code : E

Supplement code

Size code

Capacitance tolerance code

Capacitance code (ex. 470µF:471, 1,000µF:102)

Lead forming·taping code

Terminal code

Voltage code (ex. 25V:250, 50V:500)

Series code

Category

M

8

1

15

16

17

14

18

11

12 13

5

6

7

2

3

4

9

10

Higher temperature

Downsized

Higher ripple current

GPA

LXZ

GXE

●

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

(1/3)

◆SPECIFICATIONS

Items

Characteristics

(at 20℃, 120Hz)

(at 20℃, 1 minute)

(at 20℃, 120Hz)

(at 120Hz)

Category

Temperature Range

Rated Voltage Range

Capacitance Tolerance

Leakage Current

Dissipation Factor

Low Temperature

Characteristics

(Max. Impedance Ratio)

Endurance

Shelf Life

-40 to +125℃

±20% (M)

I=0.03CV or 4µA, whichever is greater.

Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

When nominal capacitance exceeds 1,000µF, add 0.02 to the above value for each 1,000µF increase.

The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple

current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours (3,000 hours for 25L and less) at 125 ℃.

Capacitance change

≦±30% of the initial value

D.F. (tanδ)

≦300% of the initial specified value

Leakage current

≦The initial specified value

The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without

voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

Capacitance change

≦±30% of the initial value

D.F. (tanδ)

≦300% of the initial specified value

Leakage current

≦The initial specified value

tanδ(Max.)

Z(-25℃)/Z(+20℃)

Z(-40℃)/Z(+20℃)

2

4

2

4

2

4

2

4

2

4

2

4

Upgrude!

CAT. No. E1001M

●

Downsized, low impedance and high-ripple current version of GXE

series

●

Specified ESR after endurance test

●

For high ripple current automotive applications.

(Direct fuel injection and electric power steering etc.)

●

Endurance with ripple current : 3,000 to 5,000 hours at 125℃

●

Solvent resistant type (see PRECAUTIONS AND GUIDELINES)

●

RoHS Compliant

25V

35V

50V

63V

80V

100V

25V

35V

50V

63V

80V

100V

0.14

0.12

0.10

0.10

0.08

0.08

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.