| Datenblatt-Suchmaschine für elektronische Bauteile |
|
AD8331ARQZ-R7 Datenblatt(PDF) 29 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD8331ARQZ-R7 Datenblatt(HTML) 29 Page - Analog Devices |
|
29 / 56 page ![]() AD8331/AD8332/AD8334 Rev. G | Page 29 of 56 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 –3 –2 –1 0 1 2 3 VINH (V) RCLMP = ∞ RCLMP = ∞ 8.8kΩ 8.8kΩ 3.5kΩ 3.5kΩ RCLMP = 1.86kΩ Output Clamping Outputs are internally limited to a level of 4.5 V p-p differential when operating at a 2.5 V common-mode voltage. The postamp implements an optional output clamp engaged through a resistor from RCLMP to ground. Table 8 shows a list of recommended resistor values. Output clamping can be used for ADC input overload protection, if needed, or postamp overload protection when operating from a lower common-mode level, such as 1.5 V. The user should be aware that distortion products increase as output levels approach the clamping levels, and the user should adjust the clamp resistor accordingly. For additional information, see the Applications Information section. The accuracy of the clamping levels is approximately ±5% in LO or HI mode. Figure 80 illustrates the output characteristics for a few values of RCLMP. Figure 80. Output Clamping Characteristics |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |