IP1827 datasheet(36/39 Pages) IRF

Teilenummer	IP1827

Bauteilbeschribung	Highly Integrated 25A Single.input Voltage, Synchronous Buck Regulator

PDF	39 Pages

Scroll/Zoom	100%

Hersteller	IRF [International Rectifier]

Direct Link	http://www.irf.com

Logo

36 / 39 page

iP1827

Highly Integrated 25A Single‐input Voltage,

Synchronous Buck Regulator

March 5, 2012 | V1.4

97599

SOLDER RESIST

 It is recommended that the lead lands are Non

Solder Mask Defined (NSMD). The solder resist

should be pulled away from the metal lead lands

by a minimum of 0.025mm to ensure NSMD

pads.

 The three power land pads should be Solder

Mask Defined (SMD), with a minimum overlap of

the solder resist onto the copper of 0.05mm to

accommodate solder resist mis‐alignment.

 Ensure that the solder resist in‐between the lead

lands and the pad land is ≥ 0.15mm due to the high

aspect ratio of the solder resist strip separating the

lead lands from the power pad lands.

Figure 37: Solder resist

* Contact International Rectifier to receive an electronic PCB Library file in your preferred format.

IP1827 Datenblatt(PDF) 36 Page - International Rectifier