HALL EFFECT

GEAR-TOOTH SENSORS

–ZERO SPEED

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

NOTES:1. Tolerances on package height and width represent

allowable mold offsets. Dimensions given are

measured at the widest point (parting line).

2. Exact body and lead configuration at vendor’s option

within limits shown.

3. Height does not include mold gate flash.

4. Recommended minimum PWB hole diameter to

clear transition area is 0.035” (0.89 mm).

5. Where no tolerance is specified, dimension is

nominal.

6. Minimum lead length was 0.500” (12.70 mm). If

existing product to the original specifications is not

acceptable, contact sales office before ordering.

Dwg. MH-003E in

0.063

0.059

0.018

0.0173

0.0138

0.0189

0.0142

0.050

1

2

3

0.100

45

°

SEE NOTE

0.183

0.178

0.181

0.176

0.600

0.560

0.086

MAX

Dwg. MH-003E mm

1.60

1.50

0.46

0.44

0.35

0.48

0.36

1.27

1

2

3

2.54

45

°

SEE NOTE

4.65

4.52

4.60

4.47

15.24

14.23

2.18

MAX

Dimensions in Inches

(controlling dimensions)

Dimensions in Millimeters

(for reference only)

The products described herein are manufactured under one or

more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283;

5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719;

5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents

pending.

Allegro MicroSystems, Inc. reserves the right to make, from time to

time, such departures from the detail specifications as may be

required to permit improvements in the performance, reliability, or

manufacturability of its products. Before placing an order, the user is

cautioned to verify that the information being relied upon is current.

Allegro products are not authorized for use as critical components

in life-support appliances, devices, or systems without express written

approval.

The information included herein is believed to be accurate and

reliable. However, Allegro MicroSystems, Inc. assumes no responsi-

bility for its use; nor for any infringements of patents or other rights of

third parties that may result from its use.