MP62071 –SINGLE CHANNEL 0.8A CURRENT-LIMITED POWER DISTRIBUTION SWITCH

MP62071 Rev. 0.9

www.MonolithicPower.com

9

9/18/2009

MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.

© 2009 MPS. All Rights Reserved.

APPLICATION INFORMATION

Power-Supply Considerations

Over 10μF capacitor between IN and GND is

recommended.

This precaution reduces power-supply transients

that may cause ringing on the input and improves

the immunity of the device to short-circuit

transients.

In order to achieve smaller output load transient

ripple, placing a high-value electrolytic capacitor

on the output pin(s) is recommended when the

load is heavy.