| Datenblatt-Suchmaschine für elektronische Bauteile |
|
NJSW172 Datenblatt(PDF) 14 Page - NICHIA CORPORATION |
|
|
|||||||||||||||||||||||||||||
NJSW172 Datenblatt(HTML) 14 Page - NICHIA CORPORATION |
|
14 / 17 page ![]() NICHIA STS-DA1-1379A <Cat.No.110629> 13 RELIABILITY (1) Tests and Results Test Reference Standard Test Conditions Test Duration Failure Criteria # Units Failed/Tested Resistance to Soldering Heat (Reflow Soldering) JEITA ED-4701 300 301 Tsld=260°C, 10sec, 2reflows, Precondition: 30°C, 70%RH, 168hr #1 0/22 Solderability (Reflow Soldering) JEITA ED-4701 303 303A Tsld=245±5°C, 5sec, Lead-free Solder(Sn-3.0Ag-0.5Cu) #2 0/22 Thermal Shock JEITA ED-4701 300 307 -40°C to 100°C, 1min dwell, 10sec transfer, Precondition: 30°C, 70%RH, 168hr 100cycles #1 0/50 Temperature Cycle JEITA ED-4701 100 105 -40°C(30min)~25°C(5min)~ 100°C(30min)~25°C(5min) 100cycles #1 0/50 Moisture Resistance (Cyclic) JEITA ED-4701 200 203 25°C~65°C~-10°C, 90%RH, 24hr per cycle 10cycles #1 0/50 High Temperature Storage JEITA ED-4701 200 201 TA=100°C 1000hours #1 0/50 Temperature Humidity Storage JEITA ED-4701 100 103 TA=60°C, RH=90% 1000hours #1 0/50 Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 1000hours #1 0/50 Room Temperature Operating Life TA=25°C, IF=450mA Test board: See NOTES below 1000hours #1 0/50 High Temperature Operating Life TA=100°C, IF=250mA Test board: See NOTES below 1000hours #1 0/50 Temperature Humidity Operating Life 60°C, RH=90%, IF=350mA Test board: See NOTES below 1000hours #1 0/50 Low Temperature Operating Life TA=-40°C, IF=350mA Test board: See NOTES below 1000hours #1 0/50 Permanence of Marking JEITA ED-4701 500 501 Isopropyl Alcohol, 23±5°C, Dipping Time: 5min 1time #1 0/22 Vibration JEITA ED-4701 400 403 200m/s2, 100~2000~100Hz, 4cycles, 4min, each X, Y, Z 48minutes #1 0/10 Electrostatic Discharges JEITA ED-4701 300 304 HBM, 2kV, 1.5kΩ, 100pF, 3pulses, alternately positive or negative #1 0/22 NOTES: 1) Test board: FR4 board thickness=1.6mm, copper layer thickness=0.07mm, RθJA≈55°C/W 2) Measurements are performed after allowing the LEDs to return to room temperature. (2) Failure Criteria Criteria # Items Conditions Failure Criteria Forward Voltage(VF) IF=350mA >Initial value×1.1 #1 Luminous Flux(ΦV) IF=350mA <Initial value×0.7 #2 Solderability - Less than 95% solder coverage |
|
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |