•

G1”1/4

counterweight

of tank

For compressor receivers

or pressurised tanks

This float switch is designed specially to maintain the air cushion in autoclaves

and is available in two different versions 1” or 1”1/4.diameter.

Thanks to its small diameter it can be introduced into the tank through a coupling

and mounted either horizontally or vertically (with counterweight).The level switch

action point is determined by the cable length with the entry point (if horizontal) or

to the application point (if vertical).When the tank water level rises , the switch

gives the starting up command to the compressor contactor or to the compressed

air valve, which then stops the pump with an auxiliary contact.

When the water / air level stabilises at the desired position, the switch stops the

compressor and starts the pump.

Cynergy3 Components Ltd

7 Cobham Road

Ferndown Industrial Estate

Wimborne

Dorset BH21 7PE

Tel:

+44 (0) 1202 897969

sales@cynergy3.com

MECHANICAL

On - Off

Differential 5%

Off - On

Minimum Cable Pivot

length 120mm

Technical Specifications

MP1C-3

MP1C-5

Contact Form

C/O

Material

High Density Polyethylene

Temp Range

°C

0 / +55

°F

+ 32 / +131

Cable

3 metre

5 metre

Standard cable covering

PVC 3x1 A05 VVF Rf60

Max. working pressure

10 bar

Electrical Specifications

Power Rating

Max

3VA

Switching Voltage

Max

60Vac

Switching Current Max. Resistive

0.25 A

It is necessary to use an auxiliary relay, when switching any significant load.

MP1C Series

www.cynergy3.com

www.cynergy3.com

ISO 9001

ISO 9001

C E R T I F IED

C E R T I F IED

© 2011 Cynergy3 Components, All Rights Reserved.

© 2011 Cynergy3 Components, All Rights Reserved.

Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.

Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.