PM0063 datasheet(27/30 Pages) STMICROELECTRONICS

Teilenummer	PM0063

Bauteilbeschribung	STM32F100xx value line Flash programming

PDF	30 Pages

Scroll/Zoom	100%

Hersteller	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

27 / 30 page

PM0063

Doc ID 16211 Rev 2

27/30

3.8

Write protection register (FLASH_WRPR)

Address offset: 0x20

Reset value: 0xFFFF FFFF

Note:

The reset value of this register depends on the value programmed in the option byte.

Bit 1 RDPRT: Read protection

When set, this indicates that the Flash memory is read-protected.

Note: This bit is read-only.

Bit 0 OPTERR: Option byte error

When set, this indicates that the loaded option byte and its complement do not match. The

corresponding byte and its complement are read as 0xFF in the FLASH_OBR or

FLASH_WRPR register.

Note: This bit is read-only.

WRP[31:16]

WRP[15:0]

Bits 31:0 WRP: Write protect

This register contains the write-protection option bytes loaded by the OBL.

0: Write protection active

1: Write protection not active

Note: These bits are read-only.

PM0063 Datenblatt(PDF) 27 Page - STMicroelectronics