LP3302 datasheet(12/13 Pages) POWER

Teilenummer	LP3302

Bauteilbeschribung	1.1MHz Fixed-Frequency PWM Operation

PDF	13 Pages

Scroll/Zoom	100%

Hersteller	POWER [Lowpower Semiconductor inc]

Direct Link	http://www.lowpowersemi.com

Logo

12 / 13 page

Preliminary Datasheet

LP3302

LP3302B6F-00

Version 1.0 Datasheet

May.-2013

www.lowpowersemi.com

Page 12 of 13

c. Using a Filtered PWM signal

Another common application is using a filtered PWM

signal as an adjustable DC voltage for LED dimming

control. A filtered PWM signal acts as the DC voltage

to regulate the output current. The recommended

application circuit is shown in the Figure 6. In this

circuit, the output ripple depends on the frequency of

PWM signal. For smaller output voltage ripple

(<100mV), the recommended frequency of 2.8V PWM

signal should be above 2kHz. To fix the frequency of

PWM signal and change the duty cycle of PWM signal

can get different output current. According to the

application circuit of Figure 5, output current is from

20.5mA to 5.5mA by adjusting the PWM duty cycle

from 10% to 90%.

LP3302 Datenblatt(PDF) 12 Page - Lowpower Semiconductor inc