Product

Folder

Sample &

Buy

Technical

Documents

Tools &

Software

Support &

Community

LM158-N, LM258-N, LM2904-N, LM358-N

SNOSBT3I – JANUARY 2000 – REVISED DECEMBER 2014

LMx58-N Low-Power, Dual-Operational Amplifiers

1 Features

3 Description

The LM158 series consists of two independent, high

1

•

Available in 8-Bump DSBGA Chip-Sized Package,

gain, internally frequency compensated operational

(See AN-1112, SNVA009)

amplifiers which were designed specifically to operate

•

Internally Frequency Compensated for Unity Gain

from a single power supply over a wide range of

•

Large DC Voltage Gain:

100 dB

voltages. Operation from split power supplies is also

possible and the low power supply current drain is

•

Wide Bandwidth (Unity Gain):

1 MHz

independent of the magnitude of the power supply

(Temperature Compensated)

voltage.

•

Wide Power Supply Range:

Application areas include transducer amplifiers, dc

–

Single Supply:

3V to 32V

gain blocks and all the conventional op-amp circuits

–

Or Dual Supplies:

±1.5V to ±16V

which now can be more easily implemented in single

•

Very Low Supply Current Drain (500

power supply systems. For example, the LM158

series can be directly operated off of the standard

μA)—Essentially Independent of Supply Voltage

3.3-V power supply voltage which is used in digital

•

Low Input Offset Voltage:

2 mV

systems and will easily provide the required interface

•

Input Common-Mode Voltage Range Includes

electronics without requiring the additional ±15V

Ground

power supplies.

•

Differential Input Voltage Range Equal to the

The LM358 and LM2904 are available in a chip sized

Power Supply Voltage

package

(8-Bump

DSBGA)

using

TI's

DSBGA

•

Large Output Voltage Swing

package technology.

•

Unique Characteristics:

Device Information(1)

–

In the Linear Mode the Input Common-Mode

PART NUMBER

PACKAGE

BODY SIZE (NOM)

Voltage Range Includes Ground and the

TO-CAN (8)

9.08 mm x 9.09 mm

Output Voltage Can Also Swing to Ground,

LM158-N

CDIP (8)

10.16 mm x 6.502 mm

even though Operated from Only a Single

LM258-N

TO-CAN (8)

9.08 mm x 9.09 mm

Power Supply Voltage.

DSBGA (8)

1.31 mm x 1.31 mm

–

The Unity Gain Cross Frequency is

LM2904-N

SOIC (8)

4.90 mm x 3.91 mm

Temperature Compensated.

PDIP (8)

9.81 mm x 6.35 mm

–

The Input Bias Current is also Temperature

TO-CAN (8)

9.08 mm x 9.09 mm

Compensated.

DSBGA (8)

1.31 mm x 1.31 mm

•

Advantages:

LM358-N

SOIC (8)

4.90 mm x 3.91 mm

–

Two Internally Compensated Op Amps

PDIP (8)

9.81 mm x 6.35 mm

–

Eliminates Need for Dual Supplies

(1) For all available packages, see the orderable addendum at

–

the end of the datasheet.

Also Goes to GND

–

Compatible with All Forms of Logic

Voltage Controlled Oscillator (VCO)

–

Power Drain Suitable for Battery Operation

2 Applications

•

Active Filters

•

General Signal Conditioning and Amplification

•

4- to 20-mA Current Loop Transmitters

1

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.