UTC2000 datasheet(17/30 Pages) MICROCHIP

17 / 30 page

Hardware Configuration

 2015 Microchip Technology Inc.

DS50002399A-page 17

3.1.4

Connector Descriptions for EVB-UTC2000-DFP

Table 3-3 describes the connectors included on the EVB-UTC2000-DFP.

3.1.5

Test Points on EVB-UTC2000-DFP

Table 3-4 describes the test points included on the EVB-UTC2000-DFP. A header may

be permanently installed on the through-hole test points if needed.

3.1.6

LED Indicators for EVB-UTC2000-UFP

Table 3-5 describes the LED indicators included on the EVB-UTC2000-UFP.

TABLE 3-3:

CONNECTOR DESCRIPTIONS

REF. DES.

TYPE

LABEL

DESCRIPTION

1x5 Header

5-pin debug header (internal MCHP use only)

USB 3.1 Gen 1

Type-A Plug

Type-A male plug

USB 3.1 Gen 1

Type-C

Receptacle

Type-C receptacle

FIGURE 3-6:

EVB-UTC2000-DFP CONNECTOR LOCATIONS

USB Type-A Plug

USB

Type-C

1x5 Debug Header

TABLE 3-4:

EVB-UTC2000-DFP TEST POINT DESCRIPTIONS

REF. DES.

TYPE

DESCRIPTION

TP1

Thru-Hole 5V probe point or external 5V supply point

TP2

Thru-Hole GND

TABLE 3-5:

EVB-UTC2000-UFP LED INDICATOR DESCRIPTIONS

REF.

DES.

LABEL

DESCRIPTION

“VBUS IN”

Indicates that a valid VBUS (5.5V-4.0V) is being supplied to the

EVB-UTC2000-UFP from the USB Type-C TMconnection and that

5V is being passed to the USB Type-A receptacle.

“3A”

Indicates when a 3.0 A capable DFP connection is detected.

“1.5A”

Indicates when a 1.5 A capable DFP connection is detected.

“Legacy”

Indicates when legacy 500 mA (USB 2.0) / 900 mA (USB 3.1 Gen 1)

capable DFP connection is detected.

UTC2000 Datenblatt(PDF) 17 Page - Microchip Technology

UTC2000 Datenblatt(HTML) 17 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Datenblatt Download

Link URL