DS26LS31C, DS26LS31M

www.ti.com

SNOSBK1C – JUNE 1998 – REVISED APRIL 2013

DS26LS31C/DS26LS31M Quad High Speed Differential Line Driver

Check for Samples: DS26LS31C, DS26LS31M

1

FEATURES

DESCRIPTION

The DS26LS31 is a quad differential line driver

2

•

Output Skew—2.0 ns Typical

designed for digital data transmission over balanced

•

Input to output delay—10 ns Typical

lines. The DS26LS31 meets all the requirements of

•

Operation from Single 5V Supply

EIA Standard RS-422 and Federal Standard 1020. It

is designed to provide unipolar differential drive to

•

twisted-pair or parallel-wire transmission lines.

•

Four Line Drivers in One Package for

The circuit provides an enable and disable function

Maximum Package Density

common to all four drivers. The DS26LS31 features

•

Output Short-Circuit Protection

TRI-STATE

outputs

and

logically

ANDed

•

Complementary Outputs

complementary outputs. The inputs are all LS

•

Meets the Requirements of EIA Standard RS-

compatible and are all one unit load.

422

•

Pin Compatible with AM26LS31

•

Available in Military and Commercial

Temperature Range

Logic and Connection Diagrams

Top View

For Complete Military Product Specifications, refer to the appropriate SMD or MDS.

Figure 1. PDIP Package

See Package D0016A or NFG0016E

See Package Numbers NAJ0020A, NFE0016A or NAD0016A

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2

All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Copyright © 1998–2013, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.