3

®

INA121

PIN CONFIGURATION

ELECTROSTATIC

DISCHARGE SENSITIVITY

This integrated circuit can be damaged by ESD. Burr-Brown

recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling

and installation procedures can cause damage.

ESD damage can range from subtle performance degradation

to complete device failure. Precision integrated circuits may

be more susceptible to damage because very small parametric

changes could cause the device not to meet its published

specifications.

Supply Voltage ..................................................................................

±18V

Analog Input Voltage Range .............................................................

±40V

Output Short-Circuit (to ground) .............................................. Continuous

Operating Temperature ................................................. –55

°C to +125°C

Storage Temperature ..................................................... –55

°C to +125°C

Junction Temperature .................................................................... +150

°C

Lead Temperature (soldering, 10s) ............................................... +300

°C

NOTE: (1) Stresses above these ratings may cause permanent damage.

Exposure to absolute maximum conditions for extended periods may degrade

device reliability.

The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes

no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change

without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant

any BURR-BROWN product for use in life support devices and/or systems.

Top View

8-Pin DIP and SO-8

R

G

V

–

IN

V

+

IN

V–

R

G

V+

V

O

Ref

1

2

3

4

8

7

6

5

Top View

PACKAGE

SPECIFIED

DRAWING

TEMPERATURE

PACKAGE

ORDERING

TRANSPORT

PRODUCT

PACKAGE

NUMBER(1)

RANGE

MARKING

NUMBER(2)

MEDIA

Single

INA121P

8-Pin DIP

006

–40

°C to +85°C

INA121P

INA121P

Rails

INA121PA

8-Pin DIP

006

–40

°C to +85°C

INA121PA

INA121PA

Rails

INA121U

SO-8 Surface-Mount

182

–40

°C to +85°C

INA121U

INA121U

Rails

"

"

"

"

"

INA121U/2K5

Tape and Reel

INA121UA

SO-8 Surface-Mount

182

–40

°C to +85°C

INA121UA

INA121UA

Rails

"

"

"

"

"

INA121UA/2K5

Tape and Reel

NOTES: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix C of Burr-Brown IC Data Book. (2) Models with a slash (/) are

available only in Tape and Reel in the quantities indicated (e.g., /2K5 indicates 2500 devices per reel). Ordering 2500 pieces of “INA121U/2K5” will get a single

2500-piece Tape and Reel. For detailed Tape and Reel mechanical information, refer to Appendix B of Burr-Brown IC Data Book.

PACKAGE/ORDERING INFORMATION