LF13331D datasheet(3/18 Pages) NSC

3 / 18 page

Electrical Characteristics (Note 4) (Continued)

Note 4: Unless otherwise specified, VCC=+15V, VEE=−15V, VR=0V, and limits apply for −55˚C≤TA≤+125˚C for the LF11331/2/3 and the LF11201/2,

−25˚C

≤TA≤+85˚C for the LF13331/2/3 and the LF13201/2.

Note 5: These parameters are limited by the pin to pin capacitance of the package.

Note 6: This is the analog signal slew rate above which the signal is distorted as a result of finite internal slew rates.

Note 7: All switches in the device are turned “OFF” by saturating a transistor at the disable node as shown in

Figure 5. The delay time will be approximately equal

to the tON or tOFF plus the delay introduced by the external transistor.

Note 8: This graph indicates the analog current at which 1% of the analog current is lost when the drain is positive with respect to the source.

Note 9:

θJA (Typical) Thermal Resistance

Molded DIP (N)

85˚C/W

Cavity DIP (D)

100˚C/W

Small Outline (M)

105˚C/W

Connection Diagrams (Top View for SO and Dual-In-Line Packages) (All Switches Shown are For Logical “0”)

LF11331/LF13331

DS005667-1

LF11332/LF13332

DS005667-13

LF11333/LF13333

DS005667-14

LF11201/LF13201

DS005667-15

LF13331D Datenblatt(PDF) 3 Page - National Semiconductor (TI)