| Datenblatt-Suchmaschine für elektronische Bauteile |
|
TMP05 Datenblatt(PDF) 15 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
TMP05 Datenblatt(HTML) 15 Page - Analog Devices |
|
15 / 28 page ![]() TMP05/TMP06 Rev. 0 | Page 15 of 28 OUT MICRO IN TMP05/ TMP06 CONV/IN OUT #1 TMP05/ TMP06 CONV/IN OUT #2 TMP05/ TMP06 CONV/IN OUT #3 TMP05/ TMP06 CONV/IN OUT #N The temperature equation for the high state conversion rate is Temperature (°C) = 421 − (93.875 × (TH/TL)) (3) Table 9. Conversion Times Using Equation 3 Temperature (°C) TL (ms) High Cycle Time (ms) –40 16.3 96.2 –30 16.7 96.6 –20 17 97.03 –10 17.4 97.42 0 17.8 97.84 10 18.3 98.27 20 18.7 98.73 25 19 98.96 30 19.2 99.21 40 19.7 99.71 50 20.2 100.24 60 20.8 100.8 70 21.4 101.4 80 22 102.02 90 22.7 102.69 100 23.4 103.4 110 24.1 104.15 120 25 104.95 130 25.8 105.81 140 26.7 106.73 150 27.7 107.71 Figure 25. Daisy-Chain Structure A second microcontroller line is needed to generate the conver- sion start pulse on the CONV/IN pin. The pulse width of the start pulse should be less than 25 µs. The start pulse on the CONV/IN pin lets the first TMP05/TMP06 part know that it should start a conversion and output its own temperature now. Once the part has output its own temperature, it then outputs a start pulse for the next part on the daisy-chain link. The pulse width of the start pulse from each TMP05/TMP06 part is typically 17 µs. Figure 26 shows the start pulse on the CONV/IN pin of the first device on the daisy chain and Figure 27 shows the PWM output by this first part. START PULSE <25 µs T0 TIME CONVERSION STARTS ON THIS EDGE MUST GO HIGH ONLY AFTER START PULSE HAS BEEN OUTPUT BY LAST TMP05/TMP06 ON DAISY CHAIN. Daisy-Chain Mode Setting the FUNC pin to a high state allows multiple TMP05/ TMP06s to be connected together and, therefore, allows one input line of the microcontroller to be the sole receiver of all temperature measurements. In this mode, the CONV/IN pin operates as the input of the daisy chain, and conversions take place at the nominal conversion rate of TH/TL = 40 ms/ 76 ms at 25°C. Therefore, the temperature equation for the daisy-chain mode of operation is Figure 26. Start Pulse at CONV/IN Pin of First TMP05/TMP06 Device on Daisy Chain Temperature (°C) = 421 − (751 × (TH/TL)) (4) START PULSE 17 µs #1 TEMP MEASUREMENT T0 TIME Figure 27. Daisy-Chain Temperature Measurement and Start Pulse Output from First TMP05/TMP06 |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |