KDB datasheet(1/6 Pages) COOPER

Teilenummer	KDB

Bauteilbeschribung	250V and 600V cable limiters

PDF	6 Pages

Scroll/Zoom	100%

Hersteller	COOPER [Cooper Bussmann, Inc.]

Direct Link	http://www.cooperbussmann.com

Logo

1 / 6 page

Technical Data 1042

Effective December 2015

Supersedes February 2015

Product description:

Cable limiters are intended to provide short-

circuit protection to electrical systems, typically

between the transformer and service entrance.

Should a short-circuit occur, the cable limiter

removes the affected cable(s) from service

and permits the other conductors to continue

delivering power.

Cable limiters are often used in utility low volt-

age networks and large multi-cable per phase

service entrances.

Unlike fuses, cable limiters are selected by

cable size rather than amperage, e.g., a “4/0”

limiter will carry the current of a 4/0 cable.

Limiters are stable, totally self-contained, static

devices with unchanging characteristics that

operate without venting of ionized gases or

explosive action.

Under high short-circuit conditions, limiters

cut off fault currents within one-half cycle

(0.008 seconds) and reduce insulation damage

from the immense heat that is developed

by sustained fault current flow. They confine

damage to the point of the short-circuit and

stop long-length cable burn-back and striking

of multiple arcs to minimize damage to or

eliminate damage to adjacent conductors.

Features and benefits:

•

Cable limiters enhance multi-conductor

system reliability by isolating faulted

conductors and taking them offline while

the balance of the conductors continue

delivering power to their circuits. This is why

cable limiters are often used in utility low

voltage networks and large multi-cable per

phase service entrances.

•

Cable limiters enhance service entrance

conductor short-circuit protection with

current-limiting performance that exceed

the typical protection offered by utility

overcurrent protective devices.

•

Cable limiters meet many system

requirements with 250Vac or 600Vac

ratings for conductor sizes from 12AWG to

1000kcmil and terminal options available that

make them easy to install including: tube-

to-tube (crimp), tube-to-bolt (crimp/bolt-in),

compression rod-to-tube (crimp) and bolt-to-

offset bolt (bolt-in) options.

•

Select cable limiters are UL® Listed under

File E90818 for use on 600V circuit for the

protection of faults up to 200kA.

250V and 600V cable limiters

Ähnliche Beschreibung - KDB

Hersteller	Teilenummer	Datenblatt	Bauteilbeschribung
Littelfuse	600VOLTSAC	154Kb / 1P	Cable Limiters
Littelfuse	LFCL-500-C-1	425Kb / 1P	Cable Limiters - 600 Volts AC
Tyco Electronics	2690	138Kb / 2P	Coaxial Limiters
M/A-COM Technology Solu...	2690	61Kb / 2P	Coaxial Limiters
Cooper Bussmann, Inc.	KWN-R-1	1Mb / 4P	250V KWN-R and 600V KWS-R Class RK1 fuses
Ohmite Mfg. Co.	RES-SLIMMOX	439Kb / 5P	Current pulse limiters
List of Unclassifed Man...	KWN-R-1	1Mb / 4P	250V KWN-R and 600V KWS-R Class RK1 fuses
Eaton All Rights Reserv...	REN	615Kb / 5P	REN (250V) and RES (600V) Renewable Class H size fuses
Eaton All Rights Reserv...	UHA	1Mb / 5P	250 V and 600 V cable limiters
Littelfuse	LFCL0500ZC6	650Kb / 3P	LFCL CABLE LIMITERS Rev: 101017

More results

KDB Datenblatt(PDF) 1 Page - Cooper Bussmann, Inc.

KDB Datenblatt(HTML) 1 Page - Cooper Bussmann, Inc.

Ähnliche Teilenummer - KDB

Ähnliche Beschreibung - KDB

Html Pages

1 2 3 4 5 6

Datenblatt Download

Link URL