USB2507 datasheet(8/42 Pages) MICROCHIP

8 / 42 page

USB2507

DS000002251A-page 8

 2007 - 2016 Microchip Technology Inc.

7-PORT USB 2.0 HUB INTERFACE

High-Speed USB

Data

USBDN[7:1]

USBDP[7:1]

IO-U

These pins connect to the downstream USB peripheral

devices attached to the Hub’s ports.

USB Power Enable

PRTPWR[7:1]

O12

Enables power to USB peripheral devices (downstream).

The active signal level of the PRTPWR7:1 pins is determined

by the Power Polarity Strapping function of the

PRTPWR_POL pin.

Ports [7:5] Green

LED

GR[7:5]

I/O12

Green indicator LED’s for ports[7:5]. LED is active low

Port 4:3 Green

LED

Port Disable

strapping option.

GR[4:3]/

PRT_DIS[1:0]

I/O12

Green indicator LED for ports 4 and 3. Will be active low

when LED support is enabled via EEPROM or SMBus.

If the hub is configured by the internal default configuration,

these pins will be sampled at RESET_N negation to

determine if ports [7:5] will be permanently disabled. Also, the

active state of the LED’s will be determined as follows:

PRT_DIS[1:0] = ‘00’, All ports are enabled,

GR4 is active high,

GR3 is active high.

PRT_DIS[1:0] = ‘01’, Port 7 is disabled,

GR4 is active high,

GR3 is active low.

PRT_DIS[1:0] = ‘10’, Ports 7 & 6 are disabled,

GR4 is active low,

GR3 is active high.

PRT_DIS[1:0] = ‘11’, Ports 7, 6 & 5 are disabled,

GR4 is active low,

GR3 is active low.

Port [2:1] Green

LED

Port Non-

Removable

strapping option.

GR[2:1]/

NON_REM[1:0]

I/O12

Green indicator LED for ports 2 and 1. Will be active low

when LED support is enabled via EEPROM or SMBus.

If the hub is configured by the internal default configuration,

these pins will be sampled at RESET_N negation to

determine if ports [3:1] contain permanently attached (non-

removable) devices. Also, the active state of the LED’s will be

determined as follows:

NON_REM[1:0] = ‘00’, All ports are removable,

GR2 is active high,

GR1 is active high.

NON_REM[1:0] = ‘01’, Port 1 is non-removable,

GR2 is active high,

GR1 is active low.

NON_REM[1:0] = ‘10’, Ports 1 & 2 are non-removable,

GR2 is active low,

GR1 is active high.

NON_REM[1:0] = ‘11’, Ports 1, 2, & 3 are non-removable,

GR2 is active low,

GR1 is active low.

Ports [7:5] Amber

LED

AM[7:5]

I/O12

Amber indicator LED’s for ports [7:5], LED is active low.

TABLE 4-1:

7-PORT HUB PIN DESCRIPTIONS (CONTINUED)

Name

Symbol

Type

Function

USB2507 Datenblatt(PDF) 8 Page - Microchip Technology

USB2507 Datenblatt(HTML) 8 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Datenblatt Download

Link URL