USB5734SLASHMR datasheet(26/61 Pages) MICROCHIP

26 / 61 page

USB5734

DS00001854D-page 26

 2015-2016 Microchip Technology Inc.

3.4.5.6

Configuration 6 - Full UART Mode

When the CFG_STRAP is configured to this mode, the programmable function pins (PROG_FUNC[7:1]) are set for full

UART configuration and also provide an SMBus/I2C interface. In this mode the PROG_FUNCx pins are used in con-

junction with the UART_TX and UART_RX pins for a full UART interface. Table 3-21 details the PROG_FUNC[7:1] pin

assignments in this mode.

Note:

When flow control is disabled, UART_nCTS, UART_nDCD, and UART_nDSR must not be left floating. In

this case, these pins should include external pull-downs to maintain UART communication in Full UART

Mode with no flow control.

TABLE 3-21:

CONFIGURATION 6 PROG_FUNC[7:1] FUNCTION ASSIGNMENT

Function

Buffer

Type

Description

PROG_FUNC1

UART_nRTS

I/O12

UART Request To Send

PROG_FUNC2

UART_nCTS

I/O6

UART Clear To Send

PROG_FUNC3

UART_nDCD

I/O12

UART Data Carrier Detect

PROG_FUNC4

SMDAT

OD12

SMBus/I2C Data

The SMBus/I2C interface acts as SMBus slave or I2C bridge

dependent on the device configuration. Refer to Section 3.4.1,

"SPI/SMBus/I2C/UART Configuration (I2C_SLV_CFG[1:0])".

PROG_FUNC5

SMCLK

OD12

SMBus/I2C Clock

The SMBus/I2C interface acts as SMBus slave or I2C bridge

dependent on the device configuration. Refer to Section 3.4.1,

"SPI/SMBus/I2C/UART Configuration (I2C_SLV_CFG[1:0])".

PROG_FUNC6

UART_nDTR

I/O12

UART Data Terminal Ready

PROG_FUNC7

UART_nDSR

I/O10

UART Data Set Ready

USB5734/MR Datenblatt(PDF) 26 Page - Microchip Technology

USB5734/MR Datenblatt(HTML) 26 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

Datenblatt Download

Link URL