LTPH245 datasheet(63/64 Pages) SII

Teilenummer	LTPH245

Bauteilbeschribung	LINE THERMAL PRINTER MECHANISM TECHNICAL REFERENCE

PDF	64 Pages

Scroll/Zoom	100%

Hersteller	SII [Seiko Instruments Inc]

Direct Link	http://www.sii.co.jp

Logo

63 / 64 page

8-2

Insert the paper vertically into the printer. (See Figure 8-2).

Pull the paper through the paper outlet and replace the platen block into the printer mechanism.

Make sure that the platen block locks with a click.

Opening the platen block exposes the reduction gear which can be damaged if touched.

Therefore, take care not to damage the gear when inserting the paper. Moreover, make sure

there is no foreign matter on the gear.

Figure 8-2 Loading Paper (2)

The paper detector may not operate properly if covered with foreign matter. Therefore, if you

find foreign matter on the sensor, remove it and clean the sensor.

If the paper skews, feed the paper so that it returns to normal, first, then take it out and set it

again.

2) Unloading paper

Open the platen block and remove the paper.

3) Removing jammed paper

Open the platen block and remove any jammed paper.

Do not pull the paper by force.

LTPH245 Datenblatt(PDF) 63 Page - Seiko Instruments Inc