YRM2.DIODE

Y-Series

Input and output terminals

Alarm-signal terminals

Type

Screw terminals

IP20 Finger safe construction.

Suitable for field installation.

Screw terminals, pluggable

IP20 Finger safe construction.

Suitable for field installation.

Solid wire

Stranded wire

American Wire Gauge

20-10 AWG

22-14 AWG

Max. wire diameter

2.8mm (including ferrule)

Wire stripping length

7mm / 0.28inch

6mm / 0.25inch

Screwdriver

3.5mm slotted or Pozidrive No 2

3mm slotted

Recommended tightening torque

0.8Nm / 7lb.in

0.4Nm / 3.5lb.in

Instructions:

a) The external circuitry of all terminals (including signalling contacts) must meet the safety requirements stipulated by

IEC/EN/UL 60950-1: SELV.

b) Use appropriate copper cables that are designed for minimum operating temperatures of:

60°C for ambient up to 45°C and

75°C for ambient up to 60°C minimum.

c) Follow national installation codes and installation regulations!

d) Ensure that all strands of a stranded wire enter the terminal connection!

e) Screws of unused terminal compartments should be securely tightened.

f) Ferrules are allowed.

g) Do not connect or disconnect the wires from the terminals below -25°C (-13°F).

Apr. 2014 / Rev. 1.4 DS-YRM2.DIODE-EN

All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted

www.pulspower.com Phone +49 89 9278 0

Germany

7/19