STM32F303VC datasheet(30/148 Pages) STMICROELECTRONICS

Teilenummer	STM32F303VC

Bauteilbeschribung	ARM®-based Cortex®-M4 32b MCUFPU, up to 256KB Flash 48KB SRAM, 4 ADCs, 2 DAC ch., 7 comp, 4 PGA, timers, 2.0-3.6 V

PDF	148 Pages

Scroll/Zoom	100%

Hersteller	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

30 / 148 page

Functional overview

STM32F303xB STM32F303xC

30/148

DocID023353 Rev 13

3.27

Development support

3.27.1

Serial wire JTAG debug port (SWJ-DP)

The ARM SWJ-DP Interface is embedded, and is a combined JTAG and serial wire debug

port that enables either a serial wire debug or a JTAG probe to be connected to the target.

The JTAG TMS and TCK pins are shared respectively with SWDIO and SWCLK and a

specific sequence on the TMS pin is used to switch between JTAG-DP and SW-DP.

3.27.2

Embedded trace macrocell™

The ARM embedded trace macrocell provides a greater visibility of the instruction and data

flow inside the CPU core by streaming compressed data at a very high rate from the

STM32F303xB/STM32F303xC through a small number of ETM pins to an external

hardware trace port analyzer (TPA) device. The TPA is connected to a host computer using

a high-speed channel. Real-time instruction and data flow activity can be recorded and then

formatted for display on the host computer running debugger software. TPA hardware is

commercially available from common development tool vendors. It operates with third party

debugger software tools.

STM32F303VC Datenblatt(PDF) 30 Page - STMicroelectronics