ams Datasheet: 2014-Jun-04 [1-00]

TSL13FN – 1

TSL13FN

Light-to-Voltage Converters

The TSL13FN is a cost optimized, highly integrated

light-to-voltage optical sensor that contains a photodiode and

a transimpedance amplifier with a 20 MΩ feedback resistor on

a single monolithic integrated circuit. The photodiode active

area is 0.5mm x 0.5mm and the sensor responds to visible light

in the range of 300 nm to 1100 nm. The output voltage is linear

with light intensity (irradiance) incident on the sensor over a

wide dynamic range. These devices are supplied in a surface

mountable package.

Ordering Information and Content Guide appear at end of

datasheet.

Key Benefits & Features

The benefits and features of TSL13FN are listed below:

Figure 1:

Added Value of Using TSL13FN

Block Diagram

The functional blocks of this device for reference are

shown below:

Figure 2:

TSL13FN Block Diagram

Benefits

Features

Approximates Human Eye Response

Single Diode

High Irradiance Responsivity to Green

18.7 mV/(

Low Supply Current

0.8mA Typical

General Description

+

-

Voltage Output

TSL13FN_Datasheet, Rev.: 1.0, TSL13FN_Datasheet_[1-00]_Light-To-Voltage Converters

Release Date: 2014-06-17, Key Contact: Matt Kroese