GENERAL DESCRIPTION
The AD5424/AD5433/AD54451 are CMOS 8-, 10-, and 12-bit current output digital-to-analog converters (DACs), respectively. These devices operate from a 2.5 V to 5.5 V power supply, making them suitable for battery-powered applications and many other applications. These DACs utilize data readback, allowing the user to read the contents of the DAC register via the DB pins. On power-up, the internal register and latches are filled with 0s and the DAC outputs are at zero scale.
As a result of manufacturing with a CMOS submicron process, they offer excellent 4-quadrant multiplication characteristics, with large signal multiplying bandwidths of up to 10 MHz.
The applied external reference input voltage (VREF) determines the full-scale output current. An integrated feedback resistor (RFB) provides temperature tracking and full-scale voltage output when combined with an external I-to-V precision amplifier.

FEATURES
   2.5 V to 5.5 V supply operation
   Fast parallel interface (17 ns write cycle)
   Update rate of 20.4 MSPS
   INL of ±1 LSB for 12-bit DAC
   10 MHz multiplying bandwidth
   ±10 V reference input
   Extended temperature range: –40°C to +125°C
   20-lead TSSOP and chip scale (4 mm × 4 mm) packages
   8-, 10-, and 12-bit current output DACs
   Upgrades to AD7524/AD7533/AD7545
   Pin-compatible 8-, 10-, and 12-bit DACs in chip scale
   Guaranteed monotonic
   4-quadrant multiplication
   Power-on reset with brownout detection
   Readback function
   0.4 μA typical power consumption
  
APPLICATIONS
   Portable battery-powered applications
   Waveform generators
   Analog processing
   Instrumentation applications
   Programmable amplifiers and attenuators
   Digitally controlled calibration
   Programmable filters and oscillators
   Composite video
   Ultrasound
   Gain, offset, and voltage trimming