ADMV1014ACCZ-R7 datasheet(8/42 Pages) AD

Teilenummer	ADMV1014ACCZ-R7

Bauteilbeschribung	24 GHz to 44 GHz, Wideband, Microwave Downconverter

PDF	42 Pages

Scroll/Zoom	100%

Hersteller	AD [Analog Devices]

Direct Link	http://www.analog.com

Logo

8 / 42 page

ADMV1014

Data Sheet

Rev. A | Page 8 of 42

Pin No.

Mnemonic

Description

26, 27

LO_N, LO_P

Negative (LO_N) and Positive (LO_P) Differential Local Oscillator Input. These pins are dc-coupled

internally with a choke to GND and matched to 100 Ω differential or 50 Ω single-ended. A dc input

above 0 V requires external ac coupling. When using the LO input as single-ended, terminate the

unused LO port with a 50 Ω impedance to ground.

VCC_MIXER

3.3 V Power Supply for the Mixer. Place a 100 pF, 0.01 μF, and a 10 μF capacitor close to this pin.

DVDD

1.8 V SPI Digital Supply. Place a 100 pF, 0.01 μF, and a 10 μF capacitor close to this pin.

SCLK

SPI Clock Digital Input. SCLK is a high impedance pin.

SDI

SPI Serial Data Input. SDI is a high impedance pin.

EPAD

Exposed Pad. Solder the exposed pad to a low impedance ground plane.

ADMV1014ACCZ-R7 Datenblatt(PDF) 8 Page - Analog Devices