SMB30FA

•

Swivel bracket with tilt and

pan movement for precise

adjustment

•

Mounting hole for 30 mm

sensor

•

12-ga. 304 stainless steel

•

Easy sensor mounting to

extrude rail T-slot

•

Metric and inch size bolt

available

A

B

68.9

36.3

83.2

Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 -

1.5 x 50

Hole size: B= ø 30.1

SMBAMS30RA

•

Right-angle SMBAMS series

bracket

•

30 mm hole for mounting

sensors

•

Articulation slots for 90°+

rotation

•

12-ga. (2.6 mm) cold-rolled

steel

53

48

45

A

C

B

Hole center spacing: A=26.0, A to B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0

SMB30MM

•

12-ga. stainless steel bracket

with curved mounting slots

for versatile orientation

•

Clearance for M6 (¼ in)

hardware

•

Mounting hole for 30 mm

sensor

70

57

A

B

C

57

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

SMBAMS30P

•

Flat SMBAMS series bracket

•

30 mm hole for mounting

sensors

•

Articulation slots for 90°+

rotation

•

12-ga. 300 series stainless

steel

45

93

A

C

B

Hole center spacing: A=26.0, A to B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following

the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture

which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty

does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR

IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR

TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO

EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR

ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR

SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE

PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,

NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any

obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.

WL50S Stainless Steel High-Intensity Spot Light - PWM Dimmable

www.bannerengineering.com - tel: 763-544-3164