Datasheet

Chemically Resistant LED work lighting

•

Intensity can be controlled from 0 to 100% using Pulse Width Modulation (PWM) on

an input control wire

•

Three lens options, depending on model, to vary spot size

•

Illuminates a large area with an even pattern of light and no shadows

•

12 to 30 V dc operation

•

56 mm (2.2 in) diameter with flat profile and 30 mm (1.2 in) mounting base

•

•

Chemically resistant 316 stainless steel housing for use in harsh environments

•

FDA grade silicone gasket

Use with the LC65 Dimmer Module. For more information, refer to the LC65 LED

Dimmer Module datasheet, p/n 177086.

Model

LED Color

Window Material

Lumens

Lux

Lens Angle

(see Beam

Patterns on

page 2)

Connection

0.5 m

1 m

WL50SWSSL5PWMQ

White,

5000–8300 K

Polycarbonate

295

13780

3445

±5°

small, more

focused spot

5-pin Euro-style integral QD

connector (use with a 4-

wire or 5-wire mating

cordset, only 3 wires used

for connection)

WL50SWSSGL5PWMQ

Glass

WL50SWSSL11PWMQ

Polycarbonate

285

5460

1365

±11°

larger spot

WL50SWSSGL11PWMQ

Glass

WL50SWSSL20PWMQ

Polycarbonate

270

2000

500

±20°

largest spot

WL50SWSSGL20PWMQ

Glass

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

WL50S Stainless Steel High-Intensity Spot

Light - PWM Dimmable

Original Document

179497 Rev. A

8 April 2014

179497