| Datenblatt-Suchmaschine für elektronische Bauteile |
|
OPA607 Datenblatt(PDF) 1 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
OPA607 Datenblatt(HTML) 1 Page - Texas Instruments |
|
1 / 35 page ![]() OPAx607-Q1, Automotive, 50-MHz , Rail to Rail Output CMOS Operational Amplifier 1 Features • Qualified for automotive applications • AEC-Q100 qualified with the following results: – Temperature grade 1: –40°C to +125°C, TA • Gain bandwidth product (GBW): 50 MHz • Quiescent current: 900 µA (typical) • Input offset drift: 1.5 μV/°C (maximum) • Offset voltage: 120 µV (typical) • Input bias current: 10 pA (maximum) • Rail-to-rail output (RRO) • Supply range : 2.2 V to 5.5 V 2 Applications • DC/DC converter • Inverter and motor control • On-Board (OBC) and wireless charger • e-Turbo • HVAC compressor module • Gesturing 3 Description The OPA607-Q1 and OPA2607-Q1 devices are decompensated, minimum gain of 6 V/V stable, general-purpose CMOS operational amplifiers with low noise of 3.8 nV/√ Hz and a GBW of 50 MHz. The low voltage offset drift (dVOS/dT) and wide bandwidth of the OPAx607-Q1 devices make them attractive for low cost general-purpose applications like low side current sensing and TIA (transipedance amplifier). The high-impedance CMOS inputs make the OPAx607-Q1 devices ideal amplifiers to interface with sensors with high output impedance (for example, piezoelectric transducers). The rail-to-rail output (RRO) of the OPAx607-Q1 devices can swing up to 8 mV from the supply rails, maximizing dynamic range. The OPAx607-Q1 is optimized for low supply voltage operation as low as 2.2 V (±1.1 V) and up to 5.5 V (±2.75 V), and is specified over the temperature range of –40°C to +125°C. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) OPA607-Q1 SOT23 (5) 2.90 mm × 1.60 mm OPA2607-Q1 VSSOP (8) 3.00 mm × 3.00 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. + ± VS+ RG RG RF VREF ISH VTH Short Circuit Detection LOAD OPAx607-Q1 REXT CEXT + ± TLV3201 ADS7042 VS+ OPAx607-Q1 for Current-Sensing Application LED driver Transimpedance stage í + VREF ADS7042 OPAx607-Q1 Photodiode CF RF OPAx607-Q1 for Transimpedance Application www.ti.com OPA607-Q1, OPA2607-Q1 SBOSA38A – FEBRUARY 2021 – REVISED APRIL 2021 Copyright © 2021 Texas Instruments Incorporated Submit Document Feedback 1 Product Folder Links: OPA607-Q1 OPA2607-Q1 OPA607-Q1, OPA2607-Q1 SBOSA38A – FEBRUARY 2021 – REVISED APRIL 2021 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. |
Ähnliche Teilenummer - OPA607 |
|
Ähnliche Beschreibung - OPA607 |
|
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |