| Datenblatt-Suchmaschine für elektronische Bauteile |
|
STM32F732IE Datenblatt(PDF) 29 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F732IE Datenblatt(HTML) 29 Page - STMicroelectronics |
|
29 / 226 page ![]() DS11854 Rev 6 29/226 STM32F732xx STM32F733xx Functional overview 47 3.15 Power supply supervisor 3.15.1 Internal reset ON On packages embedding the PDR_ON pin, the power supply supervisor is enabled by holding PDR_ON high. On the other packages, the power supply supervisor is always enabled. The device has an integrated power-on reset (POR)/power-down reset (PDR) circuitry coupled with a brownout reset (BOR) circuitry. At power-on, POR/PDR is always active, and ensures proper operation starting from 1.8 V. After the 1.8 V POR threshold level is reached, the option byte loading process starts, either to confirm or modify default BOR thresholds, or to disable BOR permanently. Three BOR thresholds are available through option bytes. The device remains in reset mode when VDD is below a specified threshold, VPOR/PDR or VBOR, without the need for an external reset circuit. The device also features an embedded programmable voltage detector (PVD) that monitors the VDD/VDDA power supply, and compares it to the VPVD threshold. An interrupt can be generated when VDD/VDDA drops below the VPVD threshold, and/or when VDD/VDDA is higher than the VPVD threshold. The interrupt service routine can then generate a warning message and/or put the MCU into a safe state. The PVD is enabled by software. 3.15.2 Internal reset OFF This feature is available only on packages featuring the PDR_ON pin. The internal POR/PDR circuitry is disabled through the PDR_ON pin. An external power supply supervisor monitors VDD and NRST, and maintains the device in reset mode as long as VDD is below a specified threshold. PDR_ON must be connected to VSS (see the figure below). Figure 9. Power supply supervisor interconnection with internal reset OFF The VDD specified threshold, below which the device must be maintained under reset, is 1.7 V (see Figure 10). A comprehensive set of power-saving mode allows design low-power applications. MS31383V4 NRST VDD PDR_ON External VDD power supply supervisor Ext. reset controller active when VDD < 1.7 V VDD Application reset signal VSS |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |