AC244036 datasheet(41/78 Pages) MICROCHIP

41 / 78 page

Optional Debug Headers

 2006-2012 Microchip Technology Inc.

DS51292T-page 41

AC162067, AC162074

Header Identification

The header AC number is used for ordering the header. However, this number is not

on the debug header, as the board is often used for multiple headers by inserting

different ICE/ICD devices. To identify these debug headers, use the following

information.

Header Setup and Operation

For these headers, you will need to connect jumpers J2 and J3 to select between the

LF and F versions of devices.

Header Limitations

See the “Limitations” section in your debug tool online Help file for details.

Header Dimensions

The figures below lists the dimensions for the debug headers. Dimensions are design

values in inches.

If the length and/or width of the debug header is too large a footprint for the target

board, consider using stand-offs, transition sockets or other extenders in the header

connection socket to raise the header above the target.

Header

ICE/ICD Device

Board Assembly Number

AC162067

PIC18F45J10-ICE

02-01854

AC162074

02-01929

Device

Device Type

Jumper J2

Jumper J3

Function

PIC18LFXXJ10

1-2

Disable voltage regulator*

PIC18FXXJ10

2-3

Enable voltage regulator

* VDDCORE must be supplied externally.

AC244036 Datenblatt(PDF) 41 Page - Microchip Technology