AM29LV128ML123REF datasheet(44/66 Pages) AMD

44 / 66 page

Am29LV128MH/L

25270C7 January 31, 2007

D A TA

SH EE T

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . . –65

°C to +150°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . –65

°C to +125°C

Voltage with Respect to Ground

CC (Note 1) . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V

IO . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V

A9, OE#, ACC, and RESET#

(Note 2) . . . . . . . . . . . . . . . . . . . . –0.5 V to +12.5 V

All other pins (Note 1) . . . . . . –0.5 V to V

CC +0.5 V

Output Short Circuit Current (Note 3) . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V.

Dur ing voltage transitions, input or I/O pins may

overshoot V

SS to –2.0 V for per iods of up to 20 ns.

Maximum DC voltage on input or I/O pins is VCC +0.5 V.

See Figure 10. During voltage transitions, input or I/O

pins may overshoot to V

CC +2.0 V for periods up to 20 ns.

See Figure 11.

2. Minimum DC input voltage on pins A9, OE#, ACC, and

RESET# is –0.5 V. During voltage transitions, A9, OE#,

ACC, and RESET# may overshoot V

SS to –2.0 V for

periods of up to 20 ns. See Figure 10. Maximum DC

input voltage on pin A9, OE#, ACC, and RESET# is

+12.5 V which may overshoot to +14.0 V for periods up

to 20 ns.

3. No more than one output may be shorted to ground at a

time. Duration of the short circuit should not be greater

than one second.

Stresses above those listed under “Absolute Maximum

Ratings” may cause permanent damage to the device. This

is a stress rating only; functional operation of the device at

these or any other conditions above those indicated in the

operational sections of this data sheet is not implied.

Exposure of the device to absolute maximum rating

conditions for extended periods may affect device reliability.

OPERATING RANGES

Industrial (I) Devices

Ambient Temperature (T

A) . . . . . . . . . . . . . . –40°C to +85°C

Supply Voltages

CC (regulated voltage range) . . . . . . . . . . . . . . . . 3.0–3.6 V

CC (full voltage range) . . . . . . . . . . . . . . . . . . . . . 2.7–3.6 V

VIO (Note 2) . . . . . . . . . . . . . . . . . . . . . . 1.65–3.6 V (Note 3)

Notes:

Operating ranges define those limits between which the

functionality of the device is guaranteed.

2. See “Ordering Information” on page 10 for valid V

CC/VIO

range combinations. The I/Os will not operate at 3V when

VIO = 1.8V.

3. 100R parts have a V

IO range from 2.7–3.6 V.

20 ns

+0.8 V

–0.5 V

20 ns

–2.0 V

Figure 10.

Maximum Negative

Overshoot Waveform

20 ns

VCC

+2.0 V

VCC

+0.5 V

20 ns

2.0 V

Figure 11.

Maximum Positive

Overshoot Waveform

AM29LV128ML123REF Datenblatt(PDF) 44 Page - Advanced Micro Devices

AM29LV128ML123REF Datenblatt(HTML) 44 Page - Advanced Micro Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

Datenblatt Download

Link URL