Data Sheet

ADH8412S-CSL

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. 0 | 5 of 8

Table 5. Absolute Maximum Ratings

Parameter

Rating

VDD

7 V

RF Input Power

25 dBm

Continuous Power Dissipation (PDISS)

TCASE = 85°C

0.82 W

TCASE = 125°C

0.46 W

Temperature

Storage Range

−65°C to +150°C

Operating Range

−55°C to +125°C

Peak Reflow (Moisture Sensitivity Level 1 (MSL1))

260°C

TJ to Maintain 1,000,000 Hours Mean Time to Failure

(MTTF)

175°C

Nominal Channel Temperature (TA = 125°C, VDD = 5 V,

IDQ = 60 mA)

157.8°C

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

Thermal performance is directly linked to printed circuit board

(PCB) design and operating environment. Close attention to PCB

thermal design is required.

θJC is the junction to case thermal resistance.

Table 6. Thermal Resistance

Package Type

θJC

Unit

CP-6-12

109.3

°C/W

OUTGAS TESTING

The criteria used for the acceptance and rejection of materials must

be determined by the user and be based upon specific component

and system requirements. Historically, a total mass loss (TML)

of 1.00% and collected volatile condensable material (CVCM) of

0.10% have been used as screening levels for rejection of space-

craft materials.

Table 7. Outgas Testing

Specification (Tested per ASTM E595-15)

Value

Unit

Total Mass Lost

0.05

%

Collected Volatile Condensable Material

<0.01

%

Water Vapor Recovered

0.02

%

RADIATION FEATURES

Table 8. Radiation Features

Specification (Tested per ASTM E595-15)

Value

Unit

Table 8. Radiation Features (Continued)

Specification (Tested per ASTM E595-15)

Value

Unit

Maximum Total Dose Available (Dose Rate = 50

rad(Si)/s to 300 rad(Si)/s)1

30

krad(Si)

1 Guaranteed by device and process characterization. Contact Analog Devices,

Inc., for data available up to 30 krads.

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in an ESD protected area only.

Human body model (HBM) per ANSI/ESDA/JEDEC JS-001.

ESD Ratings for ADH8412S-CSL

Table 9. ADH8412S-CSL, 6-Lead LFCSP

ESD Model

Withstand Threshold (V)

Class

HBM

±500

1B

POWER DERATING CURVES

Figure 2. Maximum Power Dissipation vs. Case Temperature

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.