Data Sheet

ADRF5702

SPECIFICATIONS

analog.com

Rev. A | 5 of 27

Table 1. 5V Electrical Specifications (Continued)

Parameter

Symbol

Test Conditions/Comments

Min

Typ

Max

Unit

Input at ATTOUT

Average

Attenuation state < 8dB

27

dBm

Attenuation state ≥ 8dB

24

dBm

Peak

Attenuation state < 8dB

32

dBm

Attenuation state ≥ 8dB

29

dBm

Hot Switching

All attenuation states

24

dBm

Case Temperature

TCASE

−40

105

°C

1 For input linearity performance over frequency, see Figure 48 to Figure 49.

2 Video feedthrough is peak transient measured at the RF ports in a 50Ω test setup, without an RF signal present while switching the control voltage.

3 Device does not support intermediate supply voltage levels except those levels detailed in the Table 1.

4 For RF power handling derating over the extended frequency range, see Figure 2.

5 For TCASE = 105°C operation, the RF power handling derates from the TCASE = 85°C specifications by 3 dB.

6 Peak: (≤100ns pulse duration, 5% duty cycle).