H8SXSLASH1663 datasheet(370/1158 Pages) RENESAS

370 / 1158 page

Section 7 DMA Controller (DMAC)

Rev.1.00 Jun. 07, 2006 Page 318 of 1102

REJ09B0294-0100

• Extended repeat area function which repeats the addressees within a specified area using the

transfer address with the fixed upper bits (ring buffer transfer can be performed, as an

example) is available

One bit (two bytes) to 27 bits (128 Mbytes) for transfer source and destination can be set as

extended repeat areas

• Address update can be selected from fixed address, offset addition, and increment or

decrement by 1, 2, or 4

Address update by offset addition enables to transfer data at addresses which are not placed

continuously

• Word or longword data can be transferred to an address which is not aligned with the

respective boundary

Data is divided according to its address (byte or word) when it is transferred

• Two types of interrupts can be requested to the CPU

A transfer end interrupt is generated after the number of data specified by the transfer counter

is transferred. A transfer escape end interrupt is generated when the remaining total transfer

size is less than the transfer data size at a single transfer request, when the repeat size of data

transfer is completed, or when the extended repeat area overflows.

H8SX/1663 Datenblatt(PDF) 370 Page - Renesas Technology Corp