1

chipan_reli-PRP2

chipan_reli_e-01

＊This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

1. Operating Temperature Range

Specified Value

－20～＋80℃

2. Storage Temperature Range

Specified Value

－40～＋85℃

【Test Methods and Remarks】

※with being taped, ー20～＋35℃

3. Solderability

Specified Value

At least 90% of Terminal surface immersed is covered by new solder.

【Test Methods and Remarks】

Solder temperature : 230±5℃

Duration

: 3±1 sec.

Preconditioning

: Preheating at 150℃ after immersion into flux.

4. Thermal Shock

Specified Value

Shall satisfy required VSWR value of individual specifications for each item.

【Test Methods and Remarks】

1 hour of recovery after 10 times of 30min.immersion alternately at ー40℃ and 85℃ of temperature,followed by evaluating electrical characteristics.

5. High Temperature Storage Test

Specified Value

Shall satisfy required VSWR value of individual specifications for each item.

【Test Methods and Remarks】

1 hour of recovery under standard condition after 96 hours recovery with 85℃ of temperature, followed by evaluating electrical characteristics.

6. Low Temperature Storage Test

Specified Value

Shall satisfy required VSWR value of individual specifications for each item.

【Test Methods and Remarks】

1 hour of recovery under standard condition after 96 hours recovery with ー40℃ of temperature, followed by evaluating electrical characteristics.

7. Humidity Storage Test

Specified Value

Shall satisfy required VSWR value of individual specifications for each item.

【Test Methods and Remarks】

1 hour of recovery under standard condition after 96 hours recovery with 60℃ of temperature, 90～95% relative humidity followed by evaluating electrical characteristics.

8. Resistance to Reflow

Specified Value

Shall satisfy required VSWR value of individual specifications for each item.

【Test Methods and Remarks】

Two times of reflow soldering by recommended profile attached, followed by evaluating electrical characteristics.