STM32F303VB datasheet(14/133 Pages) STMICROELECTRONICS

14 / 133 page

Functional overview

STM32F302xx/STM32F303xx

14/133

Doc ID 023353 Rev 5

3.4

Embedded SRAM

STM32F302xx/STM32F303xx devices feature up to 48 Kbytes of embedded SRAM with

hardware parity check. The memory can be accessed in read/write at CPU clock speed with

0 wait states, allowing the CPU to achieve 90 Dhrystone Mips at 72 MHz (when running

code from CCM, core coupled memory).

●

8 Kbytes of SRAM mapped on the instruction bus (Core Coupled Memory (CCM)),

used to execute critical routines or to access data (parity check on all of CCM RAM).

●

40 Kbytes of SRAM mapped on the data bus (parity check on first 16 Kbytes of SRAM).

3.5

Boot modes

At startup, Boot0 pin and Boot1 option bit are used to select one of three boot options:

●

Boot from user Flash

●

Boot from system memory

●

Boot from embedded SRAM

The boot loader is located in system memory. It is used to reprogram the Flash memory by

using USART1 (PA9/PA10), USART2 (PD5/PD6) or USB (PA11/PA12) through DFU (device

firmware upgrade) .

3.6

Cyclic redundancy check (CRC)

The CRC (cyclic redundancy check) calculation unit is used to get a CRC code using a

configurable generator polynomial value and size.

Among other applications, CRC-based techniques are used to verify data transmission or

storage integrity. In the scope of the EN/IEC 60335-1 standard, they offer a means of

verifying the Flash memory integrity. The CRC calculation unit helps compute a signature of

the software during runtime, to be compared with a reference signature generated at

linktime and stored at a given memory location.

STM32F303VB Datenblatt(PDF) 14 Page - STMicroelectronics