USB5534B datasheet(40/73 Pages) MICROCHIP

40 / 73 page

USB5534B

DS00001681C-page 40

 2012 - 2015 Microchip Technology Inc.

5.6.4

LED1/PIO1 REGISTER 1

5.6.5

LED1/PIO1 REGISTER 2

TABLE 5-21:

LED1/PIO1 REGISTER 1

LED1_CTL1

(0X0808)

LED1_PIO1 Control Register

Bit

Name

R/W

Description

XNOR

R/W

This bit toggles the polarity of the LED output. It can be used to invert the

polarity.

MODE

R/W

0 - Blink the LED.

1 - Breath the LED.

5:0

RATE

R/W

In Blink mode: This is the Blink Rate of LED in 50 ms increments. Duty

cycle of 50%. Rate range is 50 ms to 3.15 seconds.

In Breath mode: This is the time for an active breadth in 500 ms

increments.

TABLE 5-22:

LED1/PIO1 REGISTER 2

LED1_CTL2

(0X0809)

LED1_PIO1 Control Register

Bit

Name

R/W

Description

7:2

TRAILOFF_TIME

R/W

In Blink mode: Time the LED must continue blinking after LED_ON is

turned off. TRAIL_TIME is in 50ms increments. Range is 50 ms to 3.15

seconds.

In Breath mode: This is the time for an sleeping in between breadths in

500 ms increments.

LED_ON

R/W

If LED_ON is set, then start blinking or breathing this LED.

Blink timer starts when this bit is enabled. No short blinks permitted. When

this bit is disabled, blinking stops when TRAIL_TIME expires.

In Breath Mode: Breath timer starts when this bit is enabled. No short

blinks permitted. When this bit is disabled, blinking stops immediately.

LED_GPIO

R/W

‘0’ = PIO1

‘1’ = LED1

USB5534B Datenblatt(PDF) 40 Page - Microchip Technology

USB5534B Datenblatt(HTML) 40 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

Datenblatt Download

Link URL