| Datenblatt-Suchmaschine für elektronische Bauteile |
|
LPC2104 Datenblatt(PDF) 13 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LPC2104 Datenblatt(HTML) 13 Page - NXP Semiconductors |
|
13 / 32 page ![]() Philips Semiconductors LPC2104/2105/2106 Single-chip 32-bit microcontrollers Product data Rev. 04 — 05 February 2004 13 of 32 9397 750 12792 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. 6.6 Pin connect block The pin connect block allows selected pins of the microcontroller to have more than one function. Configuration registers control the multiplexers to allow connection between the pin and the on chip peripherals. Peripherals should be connected to the appropriate pins prior to being activated, and prior to any related interrupt(s) being enabled. Activity of any enabled peripheral function that is not mapped to a related pin should be considered undefined. The Pin Control Module contains two registers as shown in Table 5. 6.7 Pin function select register 0 (PINSEL0 - 0xE002C000) The PINSEL0 register controls the functions of the pins as per the settings listed in Table 6. The direction control bit in the IODIR register is effective only when the GPIO function is selected for a pin. For other functions, direction is controlled automatically. Settings other than those shown in Table 6 are reserved, and should not be used System Control External Interrupt 0 (EINT0) 14 System Control External Interrupt 1 (EINT1) 15 System Control External Interrupt 2 (EINT2) 16 Table 4: Interrupt sources…continued Block Flag(s) VIC channel # Table 5: Address Name Description Access 0xE002C000 PINSEL0 Pin function select register 0 Read/Write 0xE002C004 PINSEL1 Pin function select register 1 Read/Write Table 6: Pin function select register 0 (PINSEL0 - 0xE002C000) PINSEL0 Pin name Value Function Value after Reset 1:0 P0.0 0 0 GPIO Port 0.0 0 0 1 TxD (UART 0) 1 0 PWM1 3:2 P0.1 0 0 GPIO Port 0.1 0 0 1 RxD (UART 0) 1 0 PWM3 5:4 P0.2 0 0 GPIO Port 0.2 0 0 1 SCL (I2C) 1 0 Capture 0.0 (Timer 0) 7:6 P0.3 0 0 GPIO Port 0.3 0 01SDA (I2C) 1 0 Match 0.0 (Timer 0) 9:8 P0.4 0 0 GPIO Port 0.4 0 0 1 SCK (SPI) 1 0 Capture 0.1 (Timer 0) |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |