| Datenblatt-Suchmaschine für elektronische Bauteile |
|
USB2517I Datenblatt(PDF) 28 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
USB2517I Datenblatt(HTML) 28 Page - Microchip Technology |
|
28 / 58 page ![]() USB2517/USB2517I DS00001598B-page 28 2013-2016 Microchip Technology Inc. 7.2.1.14 Register 0Dh: Max Power For Bus Powered Operation 7.2.1.15 Register 0Eh: Hub Controller Max Current For Self Powered Operation 7.2.1.16 Register 0Fh: Hub Controller Max Current For Bus Powered Operation 7.2.1.17 Register 10h: Power-On Time BIT NUMBER BIT NAME DESCRIPTION 7:0 MAX_PWR_BP Max Power Bus_Powered: Value in 2mA increments that the Hub consumes from an upstream port (VBUS) when operating as a bus-powered hub. This value includes the hub silicon along with the combined power consumption (from VBUS) of all associated circuitry on the board. This value also includes the power consumption of a permanently attached peripheral if the hub is configured as a compound device, and the embedded peripheral reports 0mA in its descriptors. Bit Number Bit Name Description 7:0 HC_MAX_C_SP Hub Controller Max Current Self-Powered: Value in 2mA increments that the Hub consumes from an upstream port (VBUS) when operating as a self-pow- ered hub. This value includes the hub silicon along with the combined power consumption (from VBUS) of all associated circuitry on the board. This value does NOT include the power consumption of a permanently attached periph- eral if the hub is configured as a compound device. Note: The USB 2.0 Specification does not permit this value to exceed 100mA. A value of 50 (decimal) indicates 100mA, which is the default value. Bit Number Bit Name Description 7:0 HC_MAX_C_BP Hub Controller Max Current Bus-Powered: Value in 2mA increments that the Hub consumes from an upstream port (VBUS) when operating as a bus-pow- ered hub. This value will include the hub silicon along with the combined power consumption (from VBUS) of all associated circuitry on the board. This value will NOT include the power consumption of a permanently attached peripheral if the hub is configured as a compound device. A value of 50 (decimal) would indicate 100mA, which is the default value. Bit Number Bit Name Description 7:0 POWER_ON_TIME Power On Time: The length of time that it takes (in 2 ms intervals) from the time the host initiated power-on sequence begins on a port until power is sta- ble on that port. |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |