| Datenblatt-Suchmaschine für elektronische Bauteile |
|
UPSD323X Datenblatt(PDF) 51 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UPSD323X Datenblatt(HTML) 51 Page - STMicroelectronics |
|
51 / 176 page ![]() 51/176 µPSD323X WATCHDOG TIMER The hardware watchdog timer (WDT) resets the µPSD323X Devices when it overflows. The WDT is intended as a recovery method in situations where the CPU may be subjected to a software upset. To prevent a system reset the timer must be reloaded in time by the application software. If the processor suffers a hardware/software malfunc- tion, the software will fail to reload the timer. This failure will result in a reset upon overflow thus pre- venting the processor running out of control. In the Idle Mode the watchdog timer and reset cir- cuitry remain active. The WDT consists of a 22-bit counter, the Watchdog Timer RESET (WDRST) SFR and Watchdog Key Register (WDKEY). Since the WDT is automatically enabled while the processor is running. the user only needs to be concerned with servicing it. The 22-bit counter overflows when it reaches 4194304 (3FFFFFH). The WDT increments once every machine cycle. This means the user must reset the WDT at least every 4194304 machine cycles (1.258 seconds at 40MHz). To reset the WDT the user must write a value between 00-7EH to the WDRST register. The value that is written to the WDRST is loaded to the 7MSB of the 22-bit counter. This allows the user to pre-loaded the counter to an initial value to generate a flexible Watchdog time out period. Writing a “00” to WDRST clears the counter. The watchdog timer is controlled by the watchdog key register, WDKEY. Only pattern 01010101 (=55H), disables the watchdog timer. The rest of pattern combinations will keep the watchdog timer enabled. This security key will prevent the watch- dog timer from being terminated abnormally when the function of the watchdog timer is needed. In Idle Mode, the oscillator continues to run. To prevent the WDT from resetting the processor while in Idle, the user should always set up a timer that will periodically exit Idle, service the WDT, and re-enter Idle Mode. Table 32. Watchdog Timer Key Register (WDKEY: 0AEH) Table 33. Description of the WDKEY Bits 76543210 WDKEY7 WDKEY6 WDKEY5 WDKEY4 WDKEY3 WDKEY2 WDKEY1 WDKEY0 Bit Symbol Function 7to 0 WDKEY7 to WDKEY0 Enable or disable watchdog timer. 01010101 (=55h): disable watchdog timer. Others: enable watchdog timer |
|
Link URL |
| War ALLDATASHEET hilfreich? [ DONATE ] |
Über Alldatasheet | Werbung | Kontakt | Privatsphäre und Datenschutz | Link zum Datenblatt | Linktausch | Hersteller All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |