WM8150

Production Data

w

PD Rev 3.0 November 2002

2

PIN CONFIGURATION

ORDERING INFORMATION

DEVICE

TEMP. RANGE

PACKAGE

WM8150CDS

0 to 70

20-pin SSOP

WM8150CDS/R

0 to 70

20-pin SSOP

(tape and reel)

WM8150

1VINP

2

3

4

5

6

7

8

10

9

20

19

18

17

16

15

14

13

11

12

DVDD1

VSMP

MCLK

DGND

SEN

DVDD2

SDI

SCK

OP[0]

AGND2

VRLC/VBIAS

VRX

VRT

VRB

AGND1

AVDD

OP[3]/SDO

OP[1]

OP[2]

Note:

Reel quantity = 2,000

PIN DESCRIPTION

PIN

NAME

TYPE

DESCRIPTION

1

AGND2

Supply

Analogue ground (0V).

2

DVDD1

Supply

Digital core (logic and clock generator) supply (5V)

3

VSMP

Digital input

Video sample synchronisation pulse.

4

MCLK

Digital input

Master clock. This clock is applied at N times the input pixel rate (N = 2, 3, 6, 8 or

any multiple of 2 thereafter depending on input sample mode).

5

DGND

Supply

Digital ground (0V).

6

SEN

Digital input

Enables the serial interface when high.

7

DVDD2

Supply

Digital supply (5V/3.3V), all digital I/O pins.

8

SDI

Digital input

Serial data input.

9

SCK

Digital input

Serial clock.

Digital multiplexed output data bus.

ADC output data (d11:d0) is available in 4-bit multiplexed format as shown below.

AB

C

D

10

OP[0]

Digital output

d8

d4

d0

OVRNG

11

OP[1]

Digital output

d9

d5

d1

CC0

12

OP[2]

Digital output

d10

d6

d2

CC1

13

OP[3]/SDO

Digital output

d11

d7

d3

0

Alternatively, pin OP[3]/SDO may be used to output register read-back data when

address bit 4=1 and SEN has been pulsed high. See Serial Interface description in

Device Description section for further details.

14

AVDD

Supply

Analogue supply (5V)

15

AGND1

Supply

Analogue ground (0V).

16

VRB

Analogue output

Lower reference voltage.

This pin must be connected to AGND via a decoupling capacitor.

17

VRT

Analogue output

Upper reference voltage.

This pin must be connected to AGND via a decoupling capacitor.

18

VRX

Analogue output

Input return bias voltage.

This pin must be connected to AGND via a decoupling capacitor.

19

VRLC/VBIAS

Analogue I/O

Selectable analogue output voltage for RLC or single-ended bias reference.

This pin would typically be connected to AGND via a decoupling capacitor.

VRLC can be externally driven if programmed Hi-Z.

20

VINP

Analogue input

Video input.